What would I Need to Upgrade from 3,500 lbs Tandem Axles to 5,000 lbs Tandem Axles
Question:
I have a trailer with 2 3500 lbs axles.I want to upgrade to 2 5000 lbs axles. Any way to get a list of all I would need to accomplish that.
asked by: Agustin V
Expert Reply:
We carry the Timbren Axle-Less System rated at 5,200 lbs part # ASR5200S01. The axle-less system mounts to your trailer frame and takes the place of your old axle and springs.# ASR5200S01 is a straight spindle design. Timbren also offers these axles with a 4 inch drop spindle part # ASR5200S04. The Timbren Axle-Less can be mount tandem to repalce your tandem axles. There is no need to install leaf springs, because the Timbren axles have built-in spring system on each axle.
However, adding these axles will not necessarily make your trailer rated at 10,000 lbs. The trailer frame and other parts would have to be similarly upgraded to achieve this rating.
You will need new brake assemblies and hub/brake drums for these axles. For electric brake assemblies I recommend part # AKEBRK-7L-SA and # AKEBRK-7R-SA for these axles. These are the whole electric brake assemblies for both the left hand and right hand side of the trailer. These brakes are self-adjustable, so only an initial adjustment during installation is needed. For the hub and drums, I recommend part # AKHD-655-6-EZ-K. These hub and drum assemblies are equipped with inner and outer bearings, grease seals, new lug nuts, and the dust caps for the E-Z Lube spindles that are on Timbern's axles.
You will also need new wheels and tires for the new axles. The new drum bolt pattern is 6 on 5-1/2 and this will be the bolt pattern you will need for your trailer. Wheels and Tires will vary by size, load range, wheel diameter, and if you want a bias or radial tire. You will need to choose your tires and wheels when you have determined what application will work for your new trailer axles. However, you may be able to use the same tire size if there is a 6 on 5-1/2 bolt pattern available.
I have linked videos on the products that I listed and an article on tires and wheels and product list of tire and wheels that will fit the listed hubs.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Q&A: Should MORryde X-Factor Crossmember be in Front of or Behind Axle on Single Axle Trailer
- Q&A: How to Add Support to Standard Trailer Leaf Spring Hanger
- Search Results: dexter equalizer
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Replacement Bearing Kit & Leaf Springs For Dexter 5,200LB Axle On 2022 Grand Design Reflection 28BH
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Search Results: spare tire carrier
- Search Results: spare tire holder
- Search Results: spare tire mount
- Q&A: Can Just One MORryde X-Factor Crossmember Be Used On A 2021 Jayco Jay Feather 25RB?
- Q&A: How Many MORryde X-Factor Crossmember Supports Are Needed For A Tandem Axle Trailer?
- Q&A: MORryde X-Factor Crossmember that Fits MORryde CRE3000 Trailer Suspension
- Search Results: axle
- Shop: Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Shop: 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs
- Video: Kodiak Disc Brake Kit Installation K2R526D
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Search Results: 10 inch brakes and hub
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Search Results: 010~054~00
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - RG06-050 Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Brake Controller
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327826-EB
- Video: Review of etrailer by AxleTek Trailer Axles - 5,200 lbs 86.5 Inch Long Axle - e45GR