Bearing Kit Recommendation for Trailer with BT8 Spindle
Question:
I need trailer bearing kit. Its a straight spindle, 1inch i.D. and a smidgen under 2O.D. on the races. The grease seal is about 1.25inch I.D. Can you give me a part number? The BT1?
asked by: David
0
Expert Reply:
Based on what you listed it sounds like you have a BT8 spindle. That would mean you have a seal dimension on your spindle of 1.24 inches and .99 inches where the bearings ride. That means for a bearing kit you would need # BK1-100.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Bearings and Hub for Malone MicroSport Trailer
- Article: Trailer Tire Sizing
- Q&A: Replacement Bearings and Seals for Curt 5.2K to 8K Axle
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Correct Replacement Bearing and Race to Match 02475 Bearing and 14276 Race
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs