Recommended Trailer Jack For Aluminum Trailer With 5-1/2 Inch I-Beam Frame
Question:
Hi, I have an aluminum I-beam trailer that is 5.5inches tall. Do you carry a swing away trailer jack to fit this? Thank you,
asked by: Garrett
Expert Reply:
We do not offer a jack that swings up and will work with the I-beam aluminum trailer you said you have but we do have a fixed trailer jack that will work for you.
I recommend part # HD50000101. This is a fixed mount square tube jack with a 5,000-lb capacity. This is a U-bolt mounted jack. I went to the warehouse and took some measurements to make sure it would be a fit for your trailer frame. The U-bolt mounting plate measures 8-inches tall and 5-inches wide and the largest U-bolt included with the jack has a center to center measurements of 6-5/8 inches. That would easily fit over the 5-1/2 inch frame. I have attached a photo of the U-bolts included with the jack and have noted the dimensions you can check out.
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ Footplate - Fixed Mount - 28" Lift - Zinc - 5,000 lbs
- Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- 28 Inch Lift
- Bolt-On
- With Rectangle Foot
- Fulton
more information >
Continue Researching
- Video: Trailer Valet JXS Trailer Jack Review
- Shop: Trailer Valet JXS Trailer Jack w/ Drop Leg and Drill Powered Option - Side Mount - Sidewind - 7K
- Shop: Fulton Boat Trailer Jack w/ Footplate - Fixed Mount - 28" Lift - Zinc - 5,000 lbs
- Video: Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22320 Review
- Search Results: trailer jack
- Search Results: f1413230134
- Video: Review of Dutton-Lainson Trailer Jack - Boat Trailer Jack - Side Frame Mount Jack - DL97MR
- Article: How to Install E-Track in 3 Easy Steps
- Shop: etrailer Boat Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 29-1/8" Lift - Zinc - 2.5K
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Q&A: Mounting Bracket Bolt Hole Dimensions for the Fulton Marine Jack part # HD50000101
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Shop: Fulton XLT Powered Drive Trailer Jack - Drop Leg - Side Mount - 22" Lift - 2,500 lbs
- Search Results: kodiak 225 brake caliper
- Q&A: Availability of Side Frame Mount Jack for Aluminum Trailer With 3 x 6 Frame
- Video: Kodiak Trailer Brakes - Disc Brakes - K2R526D Review
- Q&A: Available Replacement Parts for Tie Down Engineering LP7000 Actuator
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Search Results: 5000 lb jack
- Search Results: 5000 lb trailer jack
- Q&A: Replacing Hydraulic Brake Line and 90-Degree Fitting on Trailer
- Q&A: Replacement Flexible Brake Line Hose for a Trailer with Torsion Axles
- Video: Fulton Fixed Mount Marine Jack review
- Q&A: Distance from Bottom of Mounting Plate to Foot on Fulton Marine Jack
- Video: Review of Ark Trailer Jack - Side Frame Mount Jack - ARK54FR
- Video: Ark Extreme Off-Road Ratcheting Trailer Jack with Dual Wheels Review
- Search Results: fulton 2500
- Shop: RV Covers
- Search Results: i beam guides