Is there a Plug and Play Brake Controller Wiring Harness Available for a 2011 Jeep Grand Cherokee

Question:

will this fit the 2011 gc as well if not do u have the proper one in stock... factory wired with 7 pin and 4 pin as well..has a connect in the same location as the dodge..gray in color with 4 wires please help wish to purchase cable and controller...thanks

asked by: Patrick J

Expert Reply:

Tekonsha, the manufacturer of the Brake Control Adapter, # 3021-P, has not yet confirmed a plug and play brake controller wiring harness for the 2011 Jeep Grand Cherokee. There should be a bundle of wires for a brake controller up under the dash on the driver side, potentially held together with tape or a tag that explains the functions of the wires. You would need to hardwire splice the brake controller wires to the vehicle wires.

On a brake controller like the Tekonsha P2, # 90885, white is ground, black is power, blue is brake out put, and red is stop light. I have included a link to the installation details for this brake controller below.

expert reply by: Michael H