Lug Nut Thread and Hub Bore for Hub 84656UC3-EZ
Question:
Do you have the lug nut thread and hub bore size available for this unit? Thanks
asked by: John
0
Expert Reply:
The lug nuts of the # 84656UC3-EZ are included and are the standard 1/2 inch thread dimension like part # CE11051.
The hub bore is 1.986 inches and for a replacement grease cap it's part # 21-41-1.
expert reply by:
Jameson C
0
Products Referenced in This Question
Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- Dexter
more information >
CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 13/16 Inch Outer Diameter
- 60-Degree Cone
- Zinc-Plated Steel
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Search Results: keyed alike hitch lock
- Shop: BOLT brand vehicle and hitch locks
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Q&A: Would Wheel with 4.19 inch Pilot Diameter Fit Trailer Hub # 8-407-5UC3-EZ
- Q&A: Hub Bore Diameter of Trailer Hub and Drum Assembly AKHD-655-35-K
- Q&A: Where to Measure to Pick Out Replacement Hubs for a Trailer
- Q&A: How To Find Replacement Bearings, Races, And Seals For Lippert Axle
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Center Bore Diameter for Dexter Trailer Hub and Drum Assembly With 8 on 6-1/2" Bolt Pattern
- Q&A: Diameter of Outside Center Hub Bore for Dexter 3,500 lb Idler Hub # 84655UC1
- Search Results: 5x150 hub
- Article: Trailer Wiring Diagrams
- Search Results: trailer jack
- Shop: Trailer Hitch
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: junction box
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: lug nut
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Search Results: e~track
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)