Which Rhino Rack Vortex ROC25 Roof Rack Fits 2016 Dodge Durango

Question

Question:

Hi I am looking to purchase the Rhino Rack ROC25 vortex aero for a naked roof, 2016 Durango. I just want to verify the width I should be purchasing. It says the bars are 3, the roof is definitely wider than that. Im assuming that the legs take up some of the space too. I just want to make sure Im buying the right rack the first time. Thanks for your help

asked by: Quentin

0

Expert Reply:

For your 2016 Dodge Durango with a naked roof the Rhino Rack part number you need is actually the part # RR35SR which has been confirmed as a fit for your vehicle.

expert reply by: Jameson C

0

Answer 1

If I had to pick a roof rack for a naked roof application, I would stick with Yakima or Thule. I have more confidence in their roof rack fits. My roof rack recommendation is the Yakima roof rack with round crossbars. It will consist of the following:…

view full answer...

Answer 2

I have included a link to the roof racks that are available for your 2015 Dodge Durango RT. One of my personal favorites is the Rhino-Rack Roof Rack, #RR35SR. This rack is aerodynamic, all black, and looks as though it was from the factory so it will…

view full answer...

Answer 3

We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part #Y00425 for the two 50" JetStream Crossbars in…

view full answer...

Answer 4

The only solution to reducing wind noise on a roof rack, like your Rhino-Rack Vortex Aero Crossbars 54" #RRVA137B-2, is to install a wind fairing / deflector. To determine which size to get, measure the usable crossbar space between the…

view full answer...

Answer 5

There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I…

view full answer...

Answer 6

I believe the piece on your Thule Atlantis 1600 XT (discontinued part 686XT back in 2012) is the part pointed out in the attached photo. If this is the case then unfortunately Thule doesn't have this available as a replacement part and if these…

view full answer...

Answer 7

Yes the Malone Profile 18s Cargo Box part #MPG10 does fit the factory crossbars of your 2018 Dodge Durango.

view full answer...

Answer 8

I do have a SeaSucker option that woks with round crossbars. The SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long, part #298-SX6000B, is your only option because the SeaSucker crossbars measure 1-1/4" in diameter…

view full answer...

Answer 9

For your 2015 Mini Cooper the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long Item #298-SX6000B is a confirmed fit. This roof rack utilizes 6 vacuum cups each rated for a pull strength of 210 lbs to secure the rack to your naked…

view full answer...

Answer 10

For your SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" #298-SX6000B, you will want to use SeaSucker Cable Anchor #298-BA0020 and etrailer Cable Lock - 10' Long - 5/16" Diameter - Steel #e98891. This will keep your SeaSucker…

view full answer...

Answer 11

The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - Folding - 48" Long #298-SX6000B does simply use the vacuum cups as the sole securing factor. Each vacuum cup is rated for 210 lbs pull strength, so this system is claiming 1,200 lbs of…

view full answer...

Answer 12

The only roof rack solution for your 2019 Mini Cooper Hardtop S 2-door is the SeaSucker part #298-SX6000B which uses vacuum cups to secure to your roof. It might seem odd but the rack is super easy to install and remove and also is very secure. I…

view full answer...

Which Rhino Rack Vortex ROC25 Roof Rack Fits 2016 Dodge Durango

Continue Researching