Recommended Replacement Hub Assembly For Utility Trailer
Question:
I just bought a utility trailer that has surge brakes and dayton style rims with a weird 5 bolt pattern on 14.5 wheels. I want to change the hub assembly to non-brake assembly with a normal bolt pattern, either 5 or 6 bolt pattern. I took drum off, the outer bearing is 4T-15123 and inner one is 25580. which new hub kit can i put on it or do you need more information. Thank You.
asked by: Carlos E
Helpful Expert Reply:
With the part numbers you provided for your bearings I recommend the Dexter Trailer Hub Assembly, part # 42655UC1.
This idler hub has a 6 on 5-1/2 wheel bolt pattern and is designed for 6,000-lb trailer axles. This hub assembly comes with bearings, races, seal, grease cap, wheel bolts and lug nuts.
Since you said you want to change the hub to a non-brake assembly, you will need to either replace the surge coupler or lock it out so it cannot move in or out.
Since you are going with a different wheel bolt pattern I have attached a link to our product page for the wheel/tire combos that have a 6 on 5-1/2 bolt pattern you can check out. I recommend going with a radial tire combo like part # AM32666 . This is a Load Range D tire on a 15-inch galvanized wheel. This combo has a maximum load capacity of 2,540 lbs at 65 psi.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Karrier ST225/75R15 Radial Trailer Tire with 15" Galvanized Wheel - 6 on 5-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 225/75-15
- 15 Inch
- M - 81 mph
- 6 on 5-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >