bing tracking image
Q & A Icon

How are Equalizer Weight Distribution Systems Adjusted  

Question:

My camper came with this equalizer. Do you have any info on how to adjust it? My Nissan Armada squats down quite a bit when hooked up. Can this equalizer be adjusted to level my SUV? Or do you recommend a suspension helper like the firestone coil rite?

0

Expert Reply:

The Equalizer Weight Distribution system part # EQ37100ET that came with your camper is one of the nicest systems on the market. It can be adjusted to level your SUV and would be a much better solution than suspension enhancement.

The goal with an Equalizer weight distribution system is to get the distance from the ground to the wheel well half way back to the unloaded height when compared to the height of the vehicle with trailer connected.

So if the distance was 30 inches unloaded and then 28 inches loaded the target is 29 inches.

If the hitch is transferring too little or too much weight you must make adjustments to the hitch setup. For changes during the initial setup we recommend adding or removing spacer washers first to try and keep the spring arms parallel with the trailer frame. In our experience, this can help reduce the amount of noise the hitch makes during slow, tight turns. It also gives you more adjustment options if needed later.

Once the maximum (8) or minimum (4) number of spacer washers has been reached, further adjustments can be made by raising or lowering the Lbrackets. Minor adjustments later for changes in loading can usually be done by moving only the L-brackets.

I also attached a link to the install instructions for this system for you to check out as well.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>