Trailer Hub Seal Recommendation for Dexter 12 inch by 2 inch Hub
Question:
What seal will i need for my Dexter 12x2inch wheel hub. I have the greese zerk on the end of the spindle but i keep blowing seals and contaminating my brake shoes. Thanks.
asked by: Trailer B
0
Expert Reply:
For Dexter 12x2 inch hubs there are two different seals that the hub could have came with. You would need the part # RG06-070 for if you need a seal with an inner diameter of 2.25 inches or the part # GS-2125DL for if you have an inner diameter of 2.125 inches.
You can measure the spindle of the trailer axle to find this same dimension as well.
expert reply by:
Jameson C
0
click to enlarge
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Grease Seal 225255UC for 2015 Wesco Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Grease Seal for 7,000 Pound Dexter Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Bearing With 1.75 Inch Inner Diameter
- Q&A: Disc Brake Kit And Actuator For A Grand Design 311BHS
- Q&A: Should Brake Shoes Be Replaced If They Have Been Exposed To Grease
- Article: How to Bleed Your Trailer Surge Brakes