Availability of 50 Amp Circuit Breaker
Question:
I have a 2012 Flagstaff HW 29SC pop-up camper with a electrical top lift motor mfg of lift motor unknown that turns off repeatedly every few inches of the lift cycle and I have to wait for circuit breakers to reset. As part of replacing the trailer connector I want to replace the circuit breakers - their lugs are quite corroded and one stud with rusted on nut just spins. Attached to the battery are two 25A 12/24V DC 32/48V DC ST-1013 circuit breakers. I can not find suitable replacement here or automotive part stores, will this single 50A be suitable replacement?
asked by: Darryl K
Expert Reply:
Superwinch breakers are thermal breakers that aren't designed for use outside of their winches. I have spoken with them a few times and while they have an amperage rating they don't recommend the use of them in other applications. If you are sure you need a 50 amp breaker then we have the part # PK54250 that would work well.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Product Page this Question was Asked From
Circuit Breaker - 50 Amp - Perpendicular Mount Bracket - Cycling Auto Reset - Metal - Type I
- Accessories and Parts
- Wiring
- Circuit Breaker
- 50 Amp
- Pollak
more information >
Continue Researching
- Q&A: Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place
- Q&A: How to Connect Electric Ground Control TT Leveling System to OneControl App
- Q&A: Can The Lippert Ground Control 3.0 Be Mounted To A Box Frame Beam
- Q&A: How to Manually Raise and Lower Jacks on Lippert Ground Control 3.0 with Faulty Control Module
- Q&A: Lippert Ground Control 3.0 Leveling System Compatibility With A 2017 CrossRoads Volante 5th Wheel
- Q&A: How Much Room on RV Frame Does Lippert Ground Control Middle and Rear Jacks Take Up
- Q&A: Can Lippert Ground Control 3.0 Install on Trailer Frames that aren't I-Beam
- Article: Snow Tire Chains Review