Connecting a Brake Controller to the Brake Switch on a 2005 Chevy Express Van Chassis
Question:
Already have my brake controller wired and works manually. 2005 chevy express cutaway class c rv what color wire do I attache the red brake controller wire to?
asked by: Darrell
0
Expert Reply:
On the brake switch on the 2005 Chevy Express Van chassis look for a white wire. Use a circuit tester such as # PTW2993 to test that wire and if it only has power when the brake pedal is pressed then it is the correct wire and will attach to the brake controller red wire. I have linked a video that should also help.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Q&A: Troubleshooting 7-Way Installation that Has No Right Turn or Stop Lights on Trailer
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly