Fit and Compatibility of Reese Landing Gear for 2006 Conquest Supreme
Question:
The landing gear on the passenger side appears to be stripped. Was interested in replacing with dual motor landing gear. Measured the existing u joints that are welded to frame. Inside distance from the two u joints is 11.25 inches. Outside distance is 15.25 inches. Will this bulldog dual motor landing gear work with existing u joints that are already welded to frame?
asked by: Kyle W
Expert Reply:
For the Bulldog Landing Gear # BD500161, you will need to have your current brackets removed and have new ones welded on. Any qualified welder could do this for you, no problem.
The two sizes we offer are for 5-1/2 inches inside to inside or 17-1/2 inches outside to outside between the brackets like the Reese part # RP500708 or 20-1/4 inches apart like the Ultra-Fab # UF17-943010.
None of the landing gear sets we offer are designed for brackets that are 15.25 inches apart.
![Jackie C](https://images.etrailer.com/static/images/catg/people/150_tn.jpg)
Products Referenced in This Question
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- Landing Gear
- 38 Inch Lift
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >