Will a Curt Weight Distribution Shank Work with an EAZ Lift Weight Distribution System
Question:
The holes on this draw bar match with the eaz lift head I currently have. Is this the best replacement draw bar for a 2 1/2inch receiver for an eaz lift head rated at 12,000lb/1200 TW?
asked by: Steve P
Expert Reply:
If the 3/4 inch diameter holes space 1-1/4 inches apart on center on shank # C17131 match what your EAZ Lift weight distribution system requires then it is a great option for a 2-1/2 inch hitch. Most major brands of weight distribution systems use the same hole spacing and diameter to mount the heads with few exceptions.
This shank has a maximum rise of 6 inches and maximum drop of 2 inches. If you need more rise or drop to tow the trailer level you can look at the selection of 2-1/2 inch shanks I have linked for you.
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Search Results: 25 inch shank
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Search Results: 25" shank
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Q&A: What Causes Loose Fit of Weight Distribution Head on 2.5" Curt Shank
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment
- Shop: B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - 18K - Black
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Video: Review of Equal-i-zer Weight Distribution Hitch - EQ90-02-4900
- Search Results: weight distribution drop shank
- Search Results: weight distribution hitch
- Search Results: weight distribution shank
- Search Results: adjustable weight distribution shank
- Article: How to Measure for Trailer Hitch Drop
- Shop: Gooseneck Hitch
- Shop: Suspension Enhancement
- Video: Curt Ball and Safety Chain Loop Kit Review C60692
- Q&A: Are Curt Weight Distribution Spring Bars Compatible with an EAZ-Lift V-5 Weight Distribution Head
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Video: Air Lift LoadLifter 5000 Ultimate Rear Air Helper Springs with Internal Jounce Bumpers Review
- Search Results: weight distributing hitch
- Shop: Grille
- Q&A: Is the Reese Weight Distribution RP66022 Too Stiff for 790 lbs of Total Tongue Weight
- Q&A: Weight Distribution for Winnebago Micro Minnie 1706FB
- Q&A: Compatibility of Oversized Weight Distribution Hitch for Temporary Use on 2400 lb Cargo Trailer
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Video: Review of Dexter Axle Trailer Brakes - Electric Drum Brakes - K23-472-473-00
on Accessories and Parts
