Replacement Drive-In Wheel Stud for Hub/Drum BS2-655
Question:
Hey I have got BS2-655 brake drums on my trailer. I had a tire came off and damage the studs and I was wondering if you know what type of studs they are or if you sell the studs. Thanks for your time.
asked by: Matthew S
0
Expert Reply:
A 655 hub/drum like # AKHD-655-6-K uses 1/2-inch drive-in studs that are 1-1/4-inches long. For a replacement stud you can use # 165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter.
expert reply by:
Adam R
0
Products Referenced in This Question
Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-1/2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Q&A: Replacement Wheel Studs for Dexter Trailer Hubs 8-249
- Search Results: dexter wheel studs
- Search Results: 8 249
- Shop: Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Shop: Trailer Hitch
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: lug nut
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: lug nuts
- Search Results: wheel studs
- Shop: Brake Controller
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: wheel stud
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Q&A: Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub