Will 4-Pole Trailer Connector Carry Signal for Hazard Lights
Question:
on a 4 wire flat connection, does the trailer have hazard lights that work when my truck hazard lights are on?
asked by: Gary M
0
Expert Reply:
The signal for the hazards is carried on the right and left turn circuit, which is the green and yellow wires on the 4-pole flat. When the vehicle hazards are switched on, the hazards on the trailer will flash as well.
If you click the provided link, you can see our trailer wiring FAQ article, which you might find helpful.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Curt 2 to 3 Wire Tail Light Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wiring a Side Marker Light to the Running Light Wire on a Trailer
- Shop: Self-Stripping Connector with Waterproof Sealant - 14-18 Gauge - White and Blue - Qty 1
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Best Replacement for Old 6.00-16 Trailer Tires
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Replacement Amber Lens for Trailer Light with SAE A P2 DOT 14
- Article: Trailer Wiring Diagrams
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)