Replacement Hubs for 1994 Coleman Destiny Pop-Up Camper Trailer
Question:
I have a 1994 coleman destiny royale. Id like to replace the hubs, but Im not sure which size I need. The axle is 2200 pounds, the bolt pattern is 5 x 4 1/2, and the bearings are L44649. The tire is 5.30-12. I tried replacing the bearings but I cant get the races out. I thought replacing the hubs might be easier. Thanks!
asked by: Jim K
Expert Reply:
Thank you for providing the details about your 1994 Coleman Destiny's axle and hubs. It is often a lot easier to just replace the complete hub than to pry out the old bearings and races and to re-install everything. New hubs also give you the confidence that comes from knowing all your components are new and in good shape.
On the page I linked you can view all compatible idler hubs in your 5-on-4-1/2 bolt pattern that are rated for a 2200-lb axle. All of these idler hubs use your L44649 bearing set.
For example, galvanized idler hub part # 8-259-50UC1 works on 2200-lb axles, shares your bearing set and bolt pattern and includes races, bearings, grease seal, grease cap and lug nuts. This hub will fit your 12-inch wheels.
You may care to use marine-grade bearing grease # L54FR to re-pack your bearings.
Products Referenced in This Question
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Search Results: l44649
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Search Results: bal leveler
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30140 Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: 5.7~8
- Search Results: 5.70 x 8 tire
- Shop: Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option - A-Frame - Sidewind - 5K
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Video: Trailer Brake Controller Installation - 2017 Dodge Grand Caravan
- Q&A: Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
- Search Results: 13194tb seal
- Search Results: 30~92~001
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Can I Change My Trailer Coupler from a 1-7/8 Inch Coupler to a 2 Inch Coupler
- Shop: Brake Controller
- Search Results: furrion net~zero power converter
- Q&A: Replacement Bearings, Races and Seal for 1993 Coleman Destiny Pop Up Camper
- Q&A: Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
- Q&A: I Want a Larger Tire for my Coleman Pop Up Camper That has Tire Size 4.80/4.00-8
- Q&A: Replacement Trailer Hub for Dexter 8-259 Idler Hub
- Article: Most Popular Wheel Bearings
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Article: Trailer Tire Sizing
- Article: Pewag Snow Tire Chains
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure the Bolt Pattern of a Trailer Wheel