What Size Hole Is Needed For Mounting Optronics Trailer Light, # MC57AB, In A Rubber Grommet
Question:
what size hole is to be drilled for miro-flex 4 s/t/t and 2 clearance lights? both will be mounted in rubber grommets.
asked by: J.R.M.
Expert Reply:
To mount the Optronics Trailer Light, # MC57AB, in a rubber grommet you would use the Optronics 2-1/2 Inch Round Grommet - Flush Mount, # A55GB. This grommet will require a 3 inch mounting hole.
To mount the Optronics Miro-Flex, Sealed, 4 Inch Round, Stop/Turn/Tail Light Trailer Light, # STL23CCRB, in a rubber grommet you would use the Optronics Rubber Grommet for 4 Inch Round Trailer Tail Lights, # A45GB. This will require a 4-1/2 inch mounting hole.
Products Referenced in This Question
Rubber Grommet for 4" Round Trailer Lights - PVC
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 4 Inch Diameter
- Grommet
- Round
- Optronics
more information >
Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 2-1/2 Inch Diameter
- Grommet
- Round
- Optronics
more information >
Optronics Trailer Clearance or Side Marker Light - Submersible - Incandescent - Round - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2-1/2 Inch Diameter
- Amber
- Optronics
more information >
Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4-5/16 Inch Diameter
- Red
- Optronics
more information >
Product Page this Question was Asked From
Optronics Trailer Clearance or Side Marker Light - Submersible - Incandescent - Round - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2-1/2 Inch Diameter
- Amber
- Optronics
more information >
Continue Researching
- Shop: RV Exterior Lighting
- Shop: LED Trailer Dome Light for Remote Switch - Surface Mount - 2,200 Lumens - White Base - Clear Lens
- Shop: GloLight Uni-Lite LED Clearance or Side Marker Light with Grommet - Turn - Round - Amber Lens
- Shop: Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 5/8" Pin Hole
- Shop: Butt Hinge w/ Non-Removable Pin - 2-1/2" x 2-1/2" - 3/16" Pin - Stainless Steel
- Q&A: Wiring Diagram for Installing Junction Box Upgrade to Utility Wiring Colors
- Search Results: backup lights
- Search Results: reverse light
- Search Results: miro~flex
- Search Results: trailer light
- Search Results: micro~flex
- Search Results: a49pb
- Search Results: a45pb
- Video: Optronics Trailer Lights - Clearance Lights - MCL121AK9PVG Review
- Video: Optronics Miro-Flex Clear Lens Trailer Tail Light Review
- Video: Optronics Trailer Lights - Utility Lights - UCL90CB Review
- Video: Buyers Products Vehicle Lights - Dome Light - 3375625336 Review
- Video: Optronics RV Lighting - Utility Light - ILL08COB Review
- Video: Command Electronics Trailer Lights - Clearance Lights - 328-003-183RR Review
- Video: Optronics Round LED Trailer Side Marker and Clearance Light Installation
- Shop: LED Clearance and Side Marker Light w/ Locking Ring - Submersible - 1 Diode - Round - Red
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Shop: Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Red Lens
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Q&A: Replacement Amber Clearance Light for Dutchman Kodiak
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Q&A: Replacement Bearings for Dexter Parts 031-017-02 and 031-030-02
- Q&A: Replacement Kwikee Series 26 Single RV Step
- Q&A: Adapter to use Roadmaster Tow Bar With Blue Ox Towing Brackets
- Q&A: Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake