Recommended 10-Inch Bolster Brackets And Hardware For Boat Trailer
Question:
I need a set of 6 each 10 trailer bunk bolsters. Do you have a kit that contains the bolster, swivels, and hardware U bolts, nuts ,and such or do I have to buy everything seperate.
asked by: Richard L
Expert Reply:
We have bolster brackets with swivels and the hardware needed to install them but they are not available as a kit.
For the brackets I recommend part # CE10001G-4. This includes 4 10-inch bolster brackets with the swivels. For the additional bolsters you said you need you can order part # CE10001G. These are sold individually.
The hardware needed to mount the bolsters to your trailer I recommend is part # CE15283GA-4. This includes 4-U-bolts, washers and nuts. For additional U-bolts and hardware you can order part # CE15283GA.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 11" - Qty 1
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-3/4 Inch Long
- CE Smith
more information >
CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Q&A: Dimensions of U-Bolts & Brackets of Ark Ezi-Guides Self-Aligning Boat Trailer Loading System AR84FR
- Q&A: Where to Weld Tandem Axle Trailer Fenders w/ Backing Plates
- Q&A: How Much Weight Can the CE Smith Bolster and Swivel Bracket Assemblies Hold
- Q&A: Do CE Smith Bunk Brackets # CE10192GA-4 Have a Weight Capacity
- Q&A: Converting Boat Trailer From Rollers to Bunk Boards
- Q&A: Replacement Motor for Lippert Model 1-065-041012-01 Landing Gear
- Q&A: Recommended Roller Bunks for 2020 18 Express Boat with Back Track Aluminum Trailer
- Article: Which Hitches are Made in the USA
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: What To Look For When Buying Ratchet Straps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Boat Trailer Showdown: Bunks vs. Rollers