How to Pick Out Bearings for a Tandem Axle Pontoon Boat Trailer
Question:
I have a 2006 Road King tandem axle pontoon trailer model RKGPE-20T. What are the parts I need to replace bearings , seals, races or anything else I might need.
asked by: Gerald L
Helpful Expert Reply:
I really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solution I have for you would be to remove the hubs and get the numbers that are stamped on the bearing or for you to remove the hubs and use a digital or dial caliper to measure where the bearings and seal ride (see pic).
With that info I can help you figure out what you need.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - 02475
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Shop: Replacement Trailer Hub Bearing - 25580
- Search Results: 25580
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Grease Cap, 2.72" OD Drive In with Plug - Qty 2
- Q&A: Choosing the Correct Replacement Electric Brakes for 8,000 lb Axle
- Q&A: Replacement Self Adjusting Brake Assemblies for Lippert 8,000 lb Axles
- Search Results: 02475
- Search Results: 8k brakes
- Search Results: 10~36
- Search Results: seal driver
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-430-5UC3 Review
- Search Results: lunette
- Search Results: grease cap
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-555-35-EZ-K
- Q&A: Which Trailer Axle Over Under Kit Fits Trailer Axle with 7.5 inch Circumference
- Shop: Suspension Enhancement
- Q&A: How to Determine Which Replacement Wheel Bearings and Grease Seals are Needed for Trailer Hubs
- Q&A: Length of Inner Part of #84 Spindle
- Q&A: Bearings and Seal Needed for Lippert 8K Axle
- Article: How to Install E-Track in 3 Easy Steps
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - 02475 Review
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-555-35-EZ-K
- Q&A: Where does a Brake Flange need to be Welded on a Spindle
- Video: Redline Trailer Brakes 4-35 Review
- Article: Trailer Tire Sizing
- Video: Review of etrailer by AxleTek Trailer Axles - 2200 LBS Trailer Idler Axle - e43GR