Weight Distribution and Sway Control Recommendation for a 2006 Chevy Silverado and Mallard Trailer
Question:
what type of weight distribution system should I purchase to be compatible for a 2006 Chevy 4 wheel drive/v8 and a Mallard 26 foot travel trailer 25/16 ball?
asked by: Ralph M
Expert Reply:
There are several aspects to consider when choosing the best weight distribution system for your 2006 Chevy Silverado and Mallard travel trailer. First, you will want to look at tongue weight capacity. You will want a system with a tongue weight capacity range that encompasses your Mallard travel trailer tongue, loaded and ready to tow.
I did some research on Mallard travel trailers. What I found was that some 26 foot models have a tongue weight of about 600 pounds. You will want to verify your specific trailer tongue weight to choose the best system. But for a 600 pound tongue weight, I recommend a system that has a range of 400 to 800 pounds.
If you want a system that includes weight distribution, I recommend Reese Round Bar Strait-Line Hitch with Shank, # RP66087. This comes with round bar weight distribution and dual-cam sway control. Dual-cam sway control works to stop trailer sway before it starts which is how it gets the Strait-Line name. This system also comes with the required shank. You can use the # 19286 ball with this system as well. I have included a link to the installation details below. I have also included an FAQ article on weight distribution and sway control, and a video showing a basic installation of a weight distribution system.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Q&A: Will The Reese Dual Cam II Weight Distribution System # RP65FR Fit 2023 GD Imagine XLS 22RBE?
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Q&A: Should Winch on Car Hauler Mount to Floor or Railing of Winch
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Q&A: Can Any Shank Be Used With the Strait-Line Weight Distribution System
- Q&A: Determining Correct Weight Distribution System For Towing 2020 Rockwood Ultra Lite 2608BS
- Q&A: After How Many Years Should Trailer Tires Be Replaced
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Weight Distribution System for 2004 Chevy Avalanche Towing 4000 lb Trailer
- Article: Best Camper Jacks
- Article: What Exactly is Tongue Weight?