Recommended Kodiak Hub And Rotor With 8 On 6-1/2 Bolt Pattern and 9/16 Inch Bolts
Question:
Kodiak 13inch XL-Lube Hub and Rotor - 8 on 6-1/2 - E-Coat - 9/16inch Bolts - 8,000 lbs. I have a 2009 Carriage Carri-lite with the Mor Ryde system. Is this the right discs. I have the Kodiak 250 caliper son and pads already. Regards,
asked by: Bernie B
Expert Reply:
We have just what you are looking for.
The hub and rotor we offer that is made by Kodiak is part # KHR1389E. This is a 13-inch hub and rotor with an 8 on 6-1/2 bolt pattern that uses 9/16-inch bolts and has an e-coat finish. The # KHR1389E is designed for 7,000-lb to 8,000-lb axles and wheels that are 16-inch diameter or larger. The races are included.
The bearings are not included. For the inner bearing you will need part # 25580 and for the outer bearing you need part # 02475. The inner seal you need is part # RG06-070.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >