Compatibility of Roadmaster Sterling Tow Bar with 2015 Jeep Wrangler
Question:
I just purchased a used sterling tow system for my new 2016 Jeep Wrangler Limited stock bumper. Will this base plate work with my Jeep and tow system?
asked by: Joe G
Expert Reply:
The vehicle specific portion of the system is the base plate, and from the photo you kindly provided, it appears that you have the Sterling tow bar, the quick disconnect and the drawbars from the base plates the previous vehicle used. Since the base plates and the draw bars are vehicle specific, you'll need a base plate kit specific to your 2016 Jeep Wrangler.
For base plates, you'd want to use part # RM-521448-5. You'd also need a set of safety cables like # RM-643. To complete your flat towing system, you'll also need a wiring solution so the RV and Wrangler taillights work in tandem, a supplemental braking system and possibly a high/low adapter so the tow bar remains within 3 inches of level.
For a wiring solution, I'd go with the Roadmaster Diode Kit, part # RM-15247 and for a supplemental braking system use the Stay-IN-Play DUO # SM99251. The DUO doesn't need to be removed or setup each time you tow or drive the Jeep.
When the tow bar is installed, you'll want the towbar to be within 3 inches of level. The base plates will be 14-3/4 inches off the ground when installed, assuming your Wrangler is at stock ride height using the stock 255/75-17 tires, so depending on your hitch height you might need a high-low adapter. You'll need to determine the height difference between the hitch on your RV and 14-3/4 inches and then choose the proper high-low adapter to place the tow bar within 3 inches of level. I'll link you to our selection of high-low adapters.
I've also linked to some insallation videos and FAQ articles that you might find helpful.
Products Referenced in This Question
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: Needing a Jack to Mount to a 5 Inch Tall Frame Rail
- Q&A: Recommended Flat Towing System for 2017 Ford Explorer FWD with 3.5L
- Article: 2023 Holiday Must Haves
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Article: Must-Have Flat Towing Components
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)