Recommended Springs and Ubolt Kit for 1993 Tacker Trailstar Boat Trailer
Question:
I need a set of springs 2000 lb I think? for a 17foot Tracker Boat 40 hp 25 1/4 L X 1 3/4W 3 leaf. The U bolt plate is 3 1/2inch X 3 1/2 inch the bolts are 9/16inch X 3 1/2inch this is for a 1993 Tacker Trailstar Trailer. The U bolts I would need 4 I measured the best I could without taking them off top to bottom of tread 5inch Id of U bolt 1 7/8inch I hope all this is right. Could you tell me the cost of this.
asked by: Ron
Expert Reply:
Sounds like the 3-Leaf Double-Eye Springs # e66SR are what you are looking for. They have an eye to eye distance of 25-1/4 inches, a width of 1-3/4 inches and are rated for 2,500lb trailer axles.
The ubolt kit # APUBR-10 should provide you with enough clearance. This ubolt kit is designed for 1-3/4 inch round axles and are 4-1/4 inches long and the ubolt post has a diameter of 3/8 of an inch. See the picture I've attached.
I have linked both items to this page for your convenience. The cost will be listed just below the product on the page as well. Since you need more than one of each you will want to update the quantity box and then the pricing will be updated in your cart.
Products Referenced in This Question
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Review of etrailer Trailer Leaf Spring Suspension - 4-Leaf Double-Eye Spring for 4K Axles - e48SR
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Search Results: grease cap
- Search Results: 3500 lb spring
- Q&A: Can I Upgrade Leaf Springs on Utility Trailer With 3500 Lb Axle
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Video: Review of TruRyde Trailer Leaf Spring Suspension - Spring Mounting Hardware - TRBU11506
- Q&A: Trailer Tires are Wearing On the Inside Tread with Low Miles on the Tires
- Q&A: Bearing Kit that Fits Hubs of 2000 Tracker TrailStar Trailer
- Q&A: Diameter of 3,500 lb Dexter Trailer Axle 35545I-ST-89
- Search Results: equalizer
- Search Results: tandem axle equalizer
- Q&A: Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Q&A: U-Bolt Suspension Kit for 1-3/4 Inch Diameter Round Trailer Axle
- Video: Redline Round Trailer Axle U-Bolt Mounting Kit Review
- Search Results: grease seal