Grease Seals Needed for a 1986, 27 Foot Boat Trailer with KOK 2947 2 Seals
Question:
replacing grease seals on 1986 ez load boat trailer. old trailer is dbl axle - for 27 ft boat. dimentions of old part is correct but depth of part is not shown. old part depth is 1/2 inch. will this part be interchageable. only marking visible on part is on rubber lip: KOK 2947 2.
asked by: braxton s
Expert Reply:
I have three seals with the 2.125 inner diameter. The Grease Seal, item # 21325, the Grease / Oil Seals 10-10 (Pair) - Double Lip Seals, item # RG06-090 and the Grease Seal GS-2125DL.
The # 21325 grease seal has an outer diameter of 3.269 inches and is .50 inches thick. This is the only seal I stock with a 3.269 outer diameter.
The # GS-2125DL and the # 10-10 grease seal have a outer diameter of 3.376 and are .31 and .430 inches thick respectively. These seals are viewed as interchangeable and the double lip seal is used for trailers with ez-lube spindles, bearing protectors, or oil bath bearings.
I do not have a cross reference for the part number that you have listed. If the above seals do not work for you let me know the inner and outer bearing numbers. With those part numbers I can cross reference the hub and spindle dimensions for your trailer and can make a recommendation for the correct seal you need to use.
Products Referenced in This Question
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - 21325
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.269 Inch O.D.
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Cap Kit For HappiJac Truck Camper Jack 4220
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Maintenance Schedule
- Q&A: Electric Over Hydraulic Brake Actuator For A 20000 Lb Trailer With Disc Brakes
- Q&A: How to Seal Rear of RV Tail Light 30-92-001 When Installing on Uneven Trailer Surface