Solution For Diversi-Tech/Fastway Adjustable Aluminum Ball Mount Where Lock Core Won't Turn

Question:

I have a divisi-tech hitch. Its about 3 years old. I am unable to adjust the ball up or down as the key does not turn. I can remove the mount as the other key slot works. Can the hitch be sent back to the manufacturer to fix? Could you provide any info? Thanks

asked by: Marty K

Expert Reply:

What you would want is the Diversi-Tech Re-Keying Kit # DTLBM02RK that would allow you to remove the lock cores you have and install the ones of the kit that also comes with the matching keys.

To install the Diversi-Tech Replacement Locking Cylinders, # DTLBM02RK, on a locking Diversi-Tech ball mount, the opening to get to the set screw is located under the warning label that is on the top of the hitch.

I called the supplier (Diversi-Tech) and they recommended when installing the replacement locks to first put some air tool oil in the hole where the set screw is located and let set for awhile. This will help break up the threadlock that secures the set screw in the ballmount.

Then you should be able to remove the set screw and install the replacement locks. You might want to put a very small amount of some threadlock on the set screw when installing.

expert reply by: Jameson C