Can the Fairing be Installed with the Logo Facing In or Can the Logo be Removed on an Inno Fairing?

Question

Question:

Hi, Is the graphic on the Inno fairing removable? Or can it be installed with the graphic facing in? Thanks,

asked by: Jason

0

Expert Reply:

Yes, the graphic on the Inno Fairing # INA261 is just a sticker and can be removed. You may want to use a goo gone type product to clear up any residue left on the fairing after removal. You will not be able to mount the fairing with the logo facing in because the feet with the rubber pads are already pre-installed.

expert reply by: Jackie C

0

Answer 1

To determine the best fairing for your application you want to measure the front crossbar between the towers. The fairing should fill that space without going past the roof line where it would start to create its own drag versus reducing the drag of…

view full answer...

Answer 2

While we have a fairing solution that fits the Thule Wingbars the Thule fairings do not fit since the bar dimensions are slightly different. Instead you'd want one of these fairings as they fit most styles of crossbars. So for a 40 inch fairing…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

I spoke with my contact at Progressive Dynamics and they informed me that the Lithium Converter for WFCO RV Power Centers part #PD4655LIV does work as an upgrade for the Parallax 7355. It has the same housing as the Replacement Converter for…

view full answer...

Answer 12

Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side. You'd at worst just have more power available than you'd need.

view full answer...

Can the Fairing be Installed with the Logo Facing In or Can the Logo be Removed on an Inno Fairing?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching