Parts Needed to Flat Tow a 2009 Chevy HHR with Falcon 2 Tow Bar Behind an RV
Question:
I tow my 2009 HHR with a tow dolly with electric breaks. If I go to 4 down towing with the Falcon 2, what breaking equipment do I need? Can any part of the existing electric breaks be used to power the new 4 down system?
asked by: Dennis
Helpful Expert Reply:
There are several braking systems that you can use with your 2009 Chevy HHR, see link. One of the preferred systems for our installers and what I recommend is the SMI Stay-IN-Play DUO proportional system, # SM99251. It will apply the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
You will not use the brake controller that was used for the tow dolly with any of the braking systems we carry.
In addition to the tow bar and braking system you will also need safety cables # RM-643, base plates on the vehicle, and lighting to flat tow your HHR. For base plates there are a couple of options. If your HHR is NOT an SS model then use # 3141-1. If it is an SS model use # 523159-1. The Falcon tow bar, # RM-520, is compatible with either set of base plates.
For lighting you could use a simple magnetic kit such as # RM-2120 or, for a more permanent solution, a diode kit such as # RM-15247. I have linked a video that should also help.
It looks like you will need to pull a fuse when flat towing your HHR. Consult the vehicle owner's manual to confirm. To make this process as easy as flipping a switch I recommend fuse bypass # RM76511. I have linked a video showing how it installs as well.
You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry. Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.
Products Referenced in This Question
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster EZ Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Standard Magnetic Tow Lights
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- 20 Foot Long Harness
- Universal
- Magnetic Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Fuse Bypass
- Custom
- Mini Fuse
- Engine Compartment
- Roadmaster
more information >
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Product Page this Question was Asked From
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Wiring Diagrams
- Article: Must-Have Flat Towing Components
- Q&A: 2024 Ford Maverick Wiring Needed for Flat Towing Behind a Motorhome
- Q&A: Does The Demco Baseplate # DM77YV Require That You Trim The Air Shutters/Dam On A Ford Maverick
- Article: How to Choose a High-Low Adapter
- Q&A: How Can I Adapt The SD Non-Binding Tow Bar e34ZR To D-Rings On A Jeep Bumper?
- Q&A: Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler
- Q&A: Parts Needed to Flat Tow 2024 Jeep Wrangler 4xe
- Q&A: Recommended Flat Towing Parts for a 2023 Ford Bronco Badlands w/ a Capable Bumper
- Q&A: Included in Package of Roadmaster Falcon 2 Tow Bar
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)