What Bolt Pattern Mounting Flange is Electric Trailer Brake Assembly # AKEBRK-35L Designed to Fit
Question:
What is the flange bolt spacing on your 3500# 10x21/4 brake assy? I have an older trailer with 10 inch brakes and 4 bolt flange that are 2 3/4 on center. Thanks for your time
asked by: Dave C
0
Expert Reply:
The bolt pattern of the Electric Trailer Brake Assembly # AKEBRK-35L that you referenced is 4 on 4 inch. If you check out the picture I attached you will see all the dimensions of the flange. You might try measuring yours again to be certain as it should measure 2-7/8 inches and not 2-3/4 inches.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Video: etrailer Trailer Brakes AKEBRK-35L Review
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Q&A: Bolt Pattern and Shipping Weight of Trailer Brake Assembly for 3,500 Pound Axles
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: Replacement Rear Taillights and Clearance Light Bar for Boat Trailer
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-555-35-K
- Search Results: clearance bar
- Video: Optronics Identification Light Bar Installation
- Search Results: clearance lights
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-G-K Review
- Search Results: 3500 drum
- Q&A: How To Pick Out Replacement Brake Assemblies and Hub and Drums for a Travel Trailer
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35 Review
- Video: etrailer Trailer Hub And Drum Assembly Installation
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-550-35-EZ-K
- Q&A: How to Pick Out Brake Assemblies for a 2008 Starcraft 21SB
- Q&A: Replacement Bearing Cover Options for Bri-Mar Dump Trailer
- Q&A: Are All Electric Trailer Brakes Self-Adjusting
- Q&A: Troubleshooting Electric Trailer Brakes That Only Work in Reverse
- Article: Testing Trailer Brake Magnets for Proper Function
- Search Results: self adjusting brakes
- Search Results: akebrk~35~sa
- Search Results: wheels
- Search Results: trailer electric brake hub assembly