Replacement Spindle, Bearings and Hub for 26-foot Prowler M26C Travel Trailer
Question:
Hi, Im trying to get parts for a 2002 fleetwood prowler m26C, which is not on your list of rvs to choose from. Can you help me figure this out? I need a trailer spindle, bearings kit, and a new hub. Thank you!
asked by: Elliot
Expert Reply:
We can help you select replacement spindles, bearings and a hub for your 26-foot Prowler M26C travel trailer. I could not find detailed specs for the trailer but it is simple enough to match up bearing part numbers; these will tell us what hub you need and also what spindle.
Note that a new spindle must be welded on perfectly concentric with the axle; specialized welding jigs are required for this and only a professional welder should attempt the installation.
For new bearings and a hub please refer to the linked photo that shows the usual appearance and placement of bearing part numbers. You can search on the part numbers from your bearings to find new ones. A new hub like # AKHD-545-35-K must use the same bearings as your current one to ensure a proper fit on the spindle , and of course must also match your axle weight capacity and wheel bolt pattern.
I have linked pages for replacement spindles, hub/drum assemblies and also bearings and races.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Q&A: Replacement Dexter Electric Trailer Brakes For 3,500 lb Axle
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Picking Out Brake Assemblies for Camper Trailer
- Q&A: What is the Proper Torque Range for Trailer Wheels
- Video: etrailer Hub And Drum Assembly Installation
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Q&A: Can I Weld on a Bolt on Brake Actuator?
- Q&A: Surge Brake Actuator Repair for Titan Drum Brake Actuating Coupler
- Video: Review of Demco Brake Actuator - Master Cylinder Repair Kit - DM24ZR
- Video: Titan Brake Actuator T2346300 Review
- Q&A: Hub/Drum Recommendation for 18 ft EZ Dumper Trailer
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-545-35-K
- Search Results: equalizers
- Shop: Trailer Hitch
- Search Results: brake magnet
- Video: Dexter Axle Trailer Brakes BP01-110 Review
- Search Results: dexter brake magnet
- Search Results: dexter 10 drum
- Search Results: trailer hubs and drums
- Search Results: al ko 10x 2 14
- Search Results: axle
- Shop: Brake Controller