Will Sidewinder Pin Box Still Help Even If It Doesnt Allow for Full 90 Degree Turn

Question:

Im looking to add a Reese sidewinder 61420 to my new 5th wheel camper. Ive done the recommended measurements and I have an issue: Distance from center of factory installed hitch jaws to back of the cab is only 25inch + 22inch length off sidewinder extension = 47 Width of trailer overhang is 97inch divided by 2 = 48.5 As you can see this does not give enough clearance for a full 90 degree turn. Any suggestions? Would this still increase my ability to turn sharply substantially? I have had someone look at my trucks hitch placement and moving it back is not an option. I still think this would be helpful with turns as now without anything in place it is very frustrating and dangerous!! no tight turns allowed!! Thanks

asked by: Matt Y

Expert Reply:

A Sidewinder like the part # RP34FR will be the best way to give you additional turning clearance, but like you measured and determined, you would not get the ability to make a 90 degree turn. You will still be able to make very tight turns, but just not to 90 degrees.

In nearly all trailering situations the ability to make a 90 degree turn is not needed. Getting very close with the Sidewinder should be just fine. Just be sure to remember that you can't go all the way to 90 degrees.

expert reply by: Jameson C