Will 12 Inch etrailer.com Brake Assemblies fit a Gulfstream Kingsport Trailer
Question:
Will the brake assembly AKEBRK-br, advertised to fit axle for 5200 to 7000 lb 12 inch brake fit a Gulfstream Kingsport? Also I noted that in camper info that the 5.2 and 7.0 K axles have different part numbers.
asked by: Bob B
Expert Reply:
As long as the brake assemblies on your current trailer are 12 inches in diameter and use a 5 bolt pattern for mounting to the spindle the part # AKEBRK-6R is going to fit. Most likely that is what you have since trailer brake assemblies are typically all made to same industry standard specs and dimension in the weight range you have.
I attached a review video for these assemblies for you to check out as well.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Converter for WFCO WF-8955PEC for Lithium Batteries
- Q&A: Will Brophy Camper Tie-Downs # HSSF Fit 2008 Tundra CrewMax 4x4 5-1/2 Ft Bed and Factory Hitch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: 4 Hole Brake Mounting Flange Dimensions for 10 Inch Brake Assembly
- Article: Trailer Maintenance Schedule
- Q&A: Complete AC System With An Advent 13.5K BTU Low Profile AC Unit
- Q&A: Replacing A Seal Number 10-47 On A 2000 National RV Tropical
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Q&A: Converting Boat Trailer to Hydraulic Disc Brakes to Use In Saltwater
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub