Correct Spring Bar Tool for Husky Centerline Weight Distribution System
Question:
Just bought a Husky Centerline hitch 31390 and getting ready to buy spring bars 31511. I wanted to know if this is the right spring bar tool for this setup. Also your the experts I have a 2010 Flagstaff 26RLSS are the 31511 spring bares the right application for my young weight and load. Thanks
asked by: Danny C
Expert Reply:
The # HT32334 is the correct spring bar tool for your system.
To determine if you have the correct application, you'll need to first determine the fully loaded and ready to tow tongue weight of your trailer. To that figure, add the weight of any gear stowed in the cargo area of the SUV or truck bed behind the rear axle. I've linked to an FAQ article that explains how to do this. These combined figures represent the Total Tongue Weight (TTW) of your set-up. The TTW of your trailer should fall as close as possible to the middle of the effective range of the weight distribution system you choose.
The spring bars you mentioned have a tongue weight capacity that ranges from 500-800 lbs. For a fully loaded tongue weight of 600-700lbs, this would be ideal. If your tongue weight is a bit heavier, use the next highest rated bars, part # 31512 rated for 800-1200 lbs.
