Trailer Hub Assembly Replacement Recommendation for a 2008 Dutchmen Rainier
Question:
I have a 2008 Dutchmen Rainer Travel Trailer manufactured by Thor Industries. It weighs approximately 4,500 lbs and should not be loaded over 6,000 lbs. It has two axels with 5 on 5-1/2 15inch tires. I do not know the manufacture of the axel or the weight rating. Do you know what trailer hub assembly would fit this trailer?
asked by: Allen
Expert Reply:
I wish there was axle info available for your trailer but that info isn't available to us but I can help you pick out what you would need.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Tire Sizing
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a Trailer Axle and Spindle
- Q&A: What Makes 5200lb and 6000lb Dexter Axles Different Capacity?
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How Long Can You Boondock in an RV?
- Article: Printable Trailer Bolt Hole Pattern Template