How to Determine if the Titan Disc Brake Kit will Fit a Trailer
Question:
Considering T4843300 disc brake kit to replace entire surge brake system on my boat trailer. trailer is a Magic tilt TAL 2044 tandem axle 6000 lb kit. The original disc brakes are on the front wheels only . Orig wheels are 13 X 4.5 JJ. Can you help determine if this is a correct fit? Thanks
asked by: Scott
Expert Reply:
If you have a tandem axle setup that is good for 7.5k the part # T4843300 should work for you but you will need to check the bearings of your hub to make sure they match this kit to be sure.
If your bearings are L68149 and L44649 then this kit will fit the spindles on your trailer. This kit is compatible with 13 inch wheels like what you have too.
The hubs on this kit are designed for the wheel bolt pattern 5 on 4-1/2 inch. You would need to measure the distance between the studs of the wheels to know if this would be correct. If that distance is 2-5/8 inches you have the correct bolt pattern for this kit.
