bing tracking image
Q & A Icon

Kodiak Disc Brake Kit Recommendation for 5,200 lb Axle with Stainless Caliper and Dacromet Hub  

Question:

I have a twin axle boat trailer with 5200 lb torsion axles. I need 4 dacroment coated vented rotors, backing plates with stainless calipers in Kodiak. the distance between the rear grease seal and the axle mounting plate is 2 1/2 inches and 3 1/2 from the back of the rotor. 5 1/2 bolt pattern with 6 lugs. will your backing plate match up with this rotor? 912-674-5093 and I will need to add the 10 stainless bolts as well thank you

0

Expert Reply:

Sounds like you are looking for the Kodiak Disc Brake Kit part # K1HR526DS. This kit comes with vented Dacromet hub and rotors and stainless steel calipers as well as the mounting plates and bearings needed to mount to a 5,200 lbs axle. Also has wheel bolt pattern of 6 on 5-1/2 inch.

As long as you have a 5 bolt brake mounting flange on your trailer this would fit and work well.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>