Choosing Replacement Spring Seats for Trailer Axle
Question:
20545I-ST-72-10 Hi I am in need of an axle with the spring perches 55inch apart. Is this something you can manufacture? Or do you sell an axle that I can weld the spring perches on myself? Thanks!
asked by: Tiffany K
Expert Reply:
It is possible to have new spring seats welded on by a qualified welder but we do not provide this service. We can get you new spring seats; these are shown on the linked page. Choose seats based on your axle diameter. For example, part # TRSS238 fits 2-3/8-inch diameter axles.
We do not offer any beam axles with a spring seat spacing of 55-inches. The nearest to that dimension is the 58-inch spacing of the axles shown on the linked page, all of which are 2000-2200-lb rated.
If you select an axle with the correct hub face spacing you can then have the old seats removed and new ones installed.
Products Referenced in This Question
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Shop: Trailer Wiring
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Search Results: tape
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: How to Make a Trailer Axle Over Under Kit for 1-3/4 inch Round Axles
- Shop: Loctite ViperLube High Performace Synthetic Grease - 14 oz Cartridge
- Q&A: Parts Needed to Move the Spring Seat of the Dexter Axle part # 20545I-EZ-60-10
- Q&A: Parts to Flip 2,000 lb Dexter Trailer Axle With Idler Hubs
- Q&A: How to Determine Leaf Spring Hanger Placement on a Single Axle Trailer
- Search Results: spring perch
- Q&A: Can Over Under Kit for Trailer Axle Be Used on Slipper Spring
- Shop: Suspension Enhancement
- Shop: Windshield Wiper Blades
- Search Results: tools
- Search Results: hopkins easy pull
- Search Results: 4 pin connector bracket
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Search Results: conspicuity tape
- Search Results: axle flip kit
- Q&A: Best Trailer Hitch Receiver For 2023 Chevy Bolt EUV
- Shop: Brake Controller
- Shop: Trailer Hitch