Adapting Folding Coupler for 3 x 3 Trailer Tongues for Use on 2-1/2-Inch Trailer Frame
Question:
I have a 2 1/2 x 2 1/2inch tube... can I use the 3 x 3inch and use steel shims to make up the difference?
asked by: George
Expert Reply:
Since we do not offer a folding coupler designed for 2-1/2 x 2-1/2-inch trailer tongues you can use the Fulton folding coupler # FHDPB330301 along with shims to make up the 1/2-inch difference in trailer tongue height and width. The material you add to the trailer's tongue should completely fill the mounting area on the folding coupler so that there is full contact between the tongue and the interior of the coupler. These shims should be welded into place by a qualified welder.
This Fulton steel coupler bolts on to a steel trailer tongue using included hardware but note it cannot be used on an aluminum trailer.
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Bolt-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: u-bolt
- Q&A: Is Half Kit of CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies Available
- Q&A: Swing-Away Tongue For Aluminum Trailer With Galvanized Steel Tongue
- Article: Trailer Lighting Requirements
- Q&A: Installation Instructions for the Fulton Fold-Away Coupler # FHDPB230101
- Q&A: Installation Instructions for a Shorter Boat Trailer Fold Away Coupler Hinge Kit
- Q&A: How Much Weight Can the CE Smith Bolster and Swivel Bracket Assemblies Hold
- Q&A: What Does the Diameter of the U-Bolts Need to be for the CE Smith Bracket Assemblies # CE10190GA-4
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Best Boat Trailer Jacks
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Air Bag Suspension (2023)