Capacities and Dimensions of the Curt and Valley Dual Receiver, Multi-Purpose Drawbars
Question:
I like the Swagman pass through bike racks but dont like the decrease in tongue weight. Is there a dual mount draw bar that 1 wont decrease a tongue weight from 500# to 350#, 2 has the lengthened draw bar to provide clearance, and 3 has a of 2 or so? Thanks
asked by: Terry B
Expert Reply:
We have the Curt Multipurpose Ball Mount with 2 inch Receiver for Bike Racks and Cargo Carriers, # D210. This draw bar has a 12-1/2 inch length from the center of the hitch pin hole to the center of the ball hole. It measures 7-1/2 inches from the center of the hitch pin hole to the center of the top receivers hitch pin hole. The ball mount portion has a 2-1/4 inch drop. The receiver has a 6 inch rise. The entire unit rated for 7500 pounds gross trailer weight and 750 pounds tongue weight, but the receiver portion is limited to 350 pounds of tongue weight.
When using this draw bar, you have to account for the tongue weight of the trailer and the weight of a bike rack or carrier plus its bikes or cargo. So if your trailers tongue weight is 350 pounds, the bike rack weighs 40 pounds, and the bikes weigh 60 pounds total, that is 450 pounds. In this scenario you would be able to use either draw bar. But the limiting factor is the lowest rated component. If your trailer hitch or vehicle are rated lower then you must stay within those capacities.
Products Referenced in This Question
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Built-In Dual Hitch
- CURT
more information >
Product Page this Question was Asked From
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 2
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Swagman
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: Best Bike Racks for Families with Kids (2023)
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit
- Q&A: E-Bike Rack Recommendation for Flat Towed Vehicle with 1-1/4 inch Hitch
- Q&A: Fit of Swagman XTC-2 2-Bike Platform Rack # S64670 on 2006 Honda CR-V
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Recommended Lock Cores for Thule Rapid Podium Feet
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Could Swagman XTC4 Bike Rack Fit Past Spare of Jeep Wrangler
- Q&A: Comparing the Swagman XC and XTC-2 Platform Trailer Hitch Mount Bike Racks on a 2004 Pontiac Vibe
- Article: Best Bike Racks for Recumbent Bikes (2023)
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4