Could Quick Disconnects Be Used for Wiring of Snow Plow Motor
Question:
Hi - I am just curious if these have been used by others for a snow plow quick connect? My original connections from my BOSS plow is round terminal lug and socket with rubber coating, but it is getting worn and loose and thought this might be a better replacement. I just am not sure about what guage wire I have on it currently. Can this one only be used for 2 guage wire? Also can these be crimped or soldered or both? Thanks,
asked by: Bob S
Expert Reply:
Snowplows are typically powered by winches which is what the quick disconnects we offer are designed for so the ones we carry could potentially work for you.
You would need to solder the terminals of the # SWC60015-8 when installing to ensure they don't come apart. You could certainly solder smaller gauge wire to the terminals if you needed.
Or another option would be the 6 gauge quick disconnects part # SWC60010-1. Depending on the gauge wire you have these might be a better fit. The max draw of these is 50 amps though.
The max draw of the ones you referenced is 175 amps.
Products Referenced in This Question
Spectro Stackable Electrical Quick-Connect - 6 Gauge - 50 Amps - Red - Qty 1
- Wiring
- Wire Connectors
- Quick Connects
- 6 Gauge
- Spectro
more information >
Product Page this Question was Asked From
Spectro Stackable Electrical Quick-Connect - 2 Gauge - 175 Amps - Gray - Qty 1
- Wiring
- Wire Connectors
- Quick Connects
- 2 Gauge
- Spectro
more information >
Continue Researching
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Article: Finding the Right Electric Winch
- Q&A: Will Buyers Products Quick Connects Connect to Johnson Connectors SB175A
- Article: Trailer Wiring Diagrams
- Q&A: Will the Curt Trailer Hitch Electric Winch Mount Plate Work With a Warn M8000 Winch
- Q&A: What is the Weight Rating of the Curt 31010 Winch Mount
- Q&A: Brake Controller Install on 2021 Jeep Wrangler Unlimited
- Q&A: Does the 2-Piece Polypropylene Trailer Vent have to Be Installed Facing a Certain Direction
- Q&A: Can the 9,500 lb Off-Road Bulldog Winch be Used to Pull Trailer Up Driveway
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Hitches are Made in the USA
- Article: Brake Controller Installation: Starting from Scratch
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: How to Wire an Electric Winch