Trailer Brake Hub/Drum Compatible w/ 23-47 and 23-48 Brake Assemblies
Question:
I have the #23-47... 48. Need hub drum with 5 bolt hub.
asked by: Sam
Expert Reply:
The hub/drum you need will depend on the reference number that's stamped on your inner and outer wheel bearings. If your inner and outer bearings are L44649, then you can use # 8-257-5UC3-EZ for an EZ Lube spindle (with the grease zerk on the end of the spindle) or # 8-257-5UC3 for standard spindles.
If your inner and outer bearings are L44643, use part # AKHD-545-2-1K.
All the hub/drums mentioned above are compatible with the brake assemblies you mentioned.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Troubleshooting A Noisey Coleman-Mach RV Air Conditioner
- Q&A: Where to Install Main Control Unit of Demco SBS Stay-IN-Play Duo on 2024 Chevy Equinox
- Q&A: Replacement for A-Frame Coupler With Yoke Latch
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Q&A: What is the Decibel Level of the Advent Air Replacement RV Air Conditioner?
- Q&A: Replacement RV Air Conditioner For Duo Therm Unit 59516.531
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer