Will a Reese Weight Distribution System fit a EAZ Lift WD Shank
Question:
Hi, I want to order Reese 66074. Will it fit my Eaz-Lift shank that I already have? Thanks,
asked by: Brian
0
Expert Reply:
The Reese WD System part # RP66074 that you referenced has 3/4 inch holes that are spaced 1-1/4 inches apart. If the shank of your Eaz system is compatible with that this the WD system would work well for you.
Nearly all WD system use the same hole dimensions. We have found that almost all brands can use each others shanks.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: Determining Trailer Tongue Weight
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Drop Shank for Reese Mini Weight Distribution Hitch
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size