Grease Seal 3504 Replacement Availability
Question:
Im hopeful you can point me to a replacement grease seal. The part # on it is 3504 made in the USA!. It has an inner dimension of 50mm 1.9685 and outer of 66mm 2.598. The seal itself is about 5mm. I believe its a single lip, but anything that will fit will due. Thank you.
asked by: Jason
Expert Reply:
The closest seal we have to the dimensions you listed is the part # 10-40. This seal has an inner diameter of 1.938 inch and an outer diameter of 2.510. If you remeasure the seal you might find out that this seal would work, but if the numbers you listed are exact then this would be close, but not close enough.
For the inner diameter it might be better to measure the outer diameter of the spindle the seal rides on.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.938 Inch I.D.
- 2.510 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Q&A: Replacement Al Ko 10k Brake Calipers and Brake Pad Recommendation
- Q&A: Replacement Zerk Fitting Recommendation for Dexter EZ Lube Spindle
- Q&A: Will the 6 on 5-1/2 Kodiak 12" Rotor item # KR12S Replace a 12” UFP Brake Rotor?
- Article: Trailer Wiring Diagrams
- Q&A: Dexter Hub 8-248 Bearing and Seal Replacement Recomendations
- Q&A: Replacement Bearings and Seals Based On Printed Number On Face Of Bearing
- Q&A: How Can I Identify an Axle Without a Sticker?
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Choose the Right Trailer Hitch Class
- Article: Most Popular Wheel Bearings
- Article: How to Measure for Trailer Hitch Drop
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Hitch Receiver Sizes