What is the Height Range of the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G
Question:
I have an 04 Dodge 1 ton dually with a flatbed and gooseneck ball in a trap door. I do not need an offset to clear camper as it has one on it already giving me at least 10 horizontal inches from the flatbed corner to the camper when my truck is turning at an angle. What I need to know is the vertical height, whether this adjustable height adapter will work to make the camper level. The camper is located 2 hours away, so I do not have the ability to take measurements.
asked by: Joe
Expert Reply:
The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G that you referenced is adjustable in height from 12 to 16 inches.
Since you don't have the measurement from the pin box plate down to the ground and then the height of the gooseneck ball down to the ground I really can't tell you if the height range of this adapter would be sufficient for you.
You would need to compare the height from the gooseneck ball down to the ground and also the fifth wheel pin box plate down to the ground. If those two distances are between 12 and 16 inches this would fit and work well.
Product Page this Question was Asked From
Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter - 12" to 16" Tall - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Trailer
- Fifth Wheel Trailer to Gooseneck Hitch
- No Offset
- 20000 lbs GTW
- Bolts Over King Pin
- Adjustable Height
- King Pin Adapters
- Convert-A-Ball
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: 5th Wheel to Gooseneck Adapters
- Q&A: Determining Replacement Pin Box Compatibility By Measuring The Bolt Pattern
- Q&A: How To Tow a 5th Wheel Trailer Using a Truck with CM Flat-Bed and Recessed Gooseneck
- Article: Trailer Wiring Diagrams
- Q&A: How to Find Gen-Y Gooseneck Pin Box Adapter for a 2021 Grand Design Reflection 31MB
- Q&A: Replacing A Venture CJ13517 Pin Box
- Q&A: Help With Adjusting Pin Box Height When Switching to Gen-Y Gooseneck Adapter
- Q&A: What Does E6 Furrion Thermostat Indicate