Bearing Buddy and Spindle Grease Seal Set Recommendation for 3,500 Pound Axle Trailer
Question:
I have three boat trailers each with a 3500 lb axel and hubs. Each hub has a 1.98 bearing buddy currently installed. Im looking to purchase 3 sets of the bearing buddy SS spindle cover and seals. Im not sure of the spindle diameter but it looks like the spindle in your video. Can you give me your correct part number so I dont have to remove a hub? Thanks.
asked by: Karl C
Expert Reply:
Typically, 3,500 pound axles use an inner bearing # L68149. However, it is a good idea to double check that this is the inner bearing on your trailer. For a trailer that has an inner bearing of L68149 with a 1.980 Bearing Buddy, you will want to use the Spindle Grease Seal Set # BB60002.
It looks like you previously ordered the Titan Disc Brake Kit with actuating coupler. This kit uses the L68149 inner bearing. For these disc brakes with the 1.980 Bearing Buddy, the # BB60002 grease seal set will work well.
If your trailers have the Titan disc brakes you previously ordered on them, the # BB6002 should work great for you.
If you also need to replace your 1.980 Bearing Buddies, you can use the Bearing Buddy Bearing Protectors - Model 1980A-SS # BB1980A-SS.
Products Referenced in This Question
Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.875 Inch I.D.
- 2.560 Inch O.D.
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Possible Bearing Buddy that Could Fit Hub with Seal 12194TC
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement