Parts Needed to Install Trailer Brakes on a 2,200 lb Dexter Axle
Question:
I am looking to install brakes on my trailer. I have a 2200 LBS Dexter Axle with 4 bolt flanges for brake plates. It is a little guy trailer with 14 inch rims with 5 bolt wheel pattern that is 2 1/2 to the first bolt hole and about 4 1/2 across to the 2nd,. I think it is a 4 1/2 bolt pattern. Do you have a kit for this or do you put the parts in a box?
asked by: Dave C
Helpful Expert Reply:
A Dexter 2,200 lb axle is going to have inner and outer bearings of L44649 so for a hub that has the same wheel bolt pattern as you and will fit you would want the part # 8-257-5UC3.
For a brake assemblies you would need the part # 23-47 for the left hand side and part # 23-48 for the right hand side.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Search Results: trailer brake wire
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Search Results: 7" drum
- Search Results: led taillight
- Search Results: spring perch
- Search Results: brake flange
- Search Results: brake mounting flange
- Search Results: l44649 bearing
- Video: Dexter Trailer Idler Axle Beam Installation
- Video: Lippert Offset Cable Spare Tire Winch Review
- Q&A: Could Lippert Tire Winch Mount Fit 2020 Coachmen 240 FS
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Q&A: Replacement Idler Hub For a BTR Spindle On an Enclosed Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Q&A: Electric Brakes for 10 Inch Wheels
- Shop: Gooseneck Hitch
- Video: Buyers Products Wiring 3375601100 Review
- Q&A: Torque Specs for Trailer Wheel Lug Nuts
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-2 Review
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-2-EZ-1K Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-257-5UC3-EZ Review