Timbren Axle Less System and Hub with 5 on 5 inch Bolt Pattern Recommendation
Question:
Hello, i am looking to get a set of Timbren Axel-less suspension for my expedition trailer build. I was wondering what the best setup would be and if they are customize-able. It is a M-416 trailer and will be towed behind a 2013 Jeep Wrangler with a 2.5 inch lift. Are the hubs available in a 5X5 bolt pattern? And what version do you think would best fit my application. Thanks so much for your help.
asked by: Jake
Expert Reply:
First thing you will need to know to determine the correct Timbren system will be the total axle capacity you would need for your trailer. We have ones that range from 1,200 lbs up to 7,000 lbs.
We don't have a ton of hubs with a 5 on 5 inch bolt pattern, but if you went with a 3,500 lb Timbren system like part # ASR3500S06 you could use the part # 84556UC3 for a hub/drum or part # 84550BX for just a hub.
The # ASR3500S06 has a 4 inch lift built into it so it would be great for an offroad trailer.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: Help Determining Wire Colors of Trailer Wiring for Installing New 7-Way
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Q&A: 2020 Aliner Expedition Suspension Upgrade for Dexter 3,500 lb Torsion Axle
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: How to Identify Trailer Axles
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: Overview of Lubricating Grease
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Raise Your Travel Trailer Height