Replacement Trailer Hub Grease Seal with Inner Diameter of 1.6 inches
Question:
Hello, i need help finding a new hub for my trailer, the information i have is as follows. Bolt Pattern: 5 bolt, 4 inch Axle Seal farthest back: 1.696 inches Axle Inner Bearing: 1.250 inches Axle Blank Spot: 1.123 inches Axle Outer Bearing: 0.750 i have a hub that fits existing however i cannot find the correct greese seal for it, so i am now just thinking about replacing the entire hub.. can you point me in the direction of which hubs i need to buy? Thanks.
asked by: James D
Expert Reply:
If the outer diameter of the grease seal of your hub is 2-1/2 inches the grease seal part # 168255TB would fit and work well. You can measure the bore of your hub where the seal was installed to determine this.
Otherwise the spindle dimensions you listed are off enough from what we carry that none of them would fit.
Product Page this Question was Asked From
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: How Long Can You Boondock in an RV?
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Q&A: Damaged Caused to Travel Trailer Brake Drums and Bearings by High Temperatures
- Q&A: Adding Brakes to a Mobile Home Axle
- Article: Trailer Maintenance Schedule
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: What To Look For When Buying Ratchet Straps