Measuring for Bearing Replacement on Harbor Freight Trailer
Question:
Do you sell grease bearings in mm sizes? these are for my Harbor Freight Boat trailer.
asked by: Irene L
Expert Reply:
In order to find the best replacement bearings and seals for your Harbor freight Trailer, you will need to remove the wheel and hub and pull the bearings, seals, and races off your spindle. I have attached a photo that shows where you can find the numbers on those items. We don't offer bearings in mm sizes but you might still be able to find what you need.
If you are not able to find the numbers on these items, you will need to take some measurements of the spindle with a precision instrument like a digital caliper in the locations as shown in the attached photo.
Typically, Harbor Freight uses non-standard size bearings and it may be difficult to find any that would work for you. If you wish to give the dimensions, we can make a recommendation for a replacement axle that would work on your trailer.
I have also included a helpful article that shows how to replace the bearings, races and seals you can check out.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure a Trailer Axle
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Q&A: Can Electric Brakes be Used on a Boat Trailer