How to Pick Out a Weight Distribution System for a Truck with a 6 inch Lift and Off Road Tires
Question:
Hi, I have a 2001 F250 7.3l turbo diesel, crew cab, long bed and Im pulling a 1993 Wells Cargo 28foot enclosed trailer. Im looking for a weight distribution hitch/sway control system for a long haul I have to do. My truck also has a 6inch lift with 35inch tires. Thanks in adjacent for your help.
asked by: Tim S
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Once you know your tongue weight you will want to check out the link I attached that has all of the weight distribution systems we carry without a shank (since you will need to go with a drop shank due to your tires and lift kit). You will be able to select your tongue weight from the filters to see what would be rated for your setup.
The drop shank part # C17124 could work well for you depending on how much drop you would need to tow your trailer level. With a trunnion WD system like the part # RP66074 this would give you up to 9 inches of drop.
Products Referenced in This Question
Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Round - 9 Inch Drop
- Trunnion - 7 Inch Drop
- CURT
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Q&A: Bulldog Powered-Drive Kit Compatibility With 12K Ram Landing Gear
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Will Brake Lights Flash When Using Curt True Course Sway Control