How to Pick Out Replacement Hubs for a Trailer
Question:
If Im looking to replace the wheel hubs on my boat trailer what do I need to know before ordering them?
asked by: Bill Z
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes